10-Ports Gigabit Ethernet L2 Managed Industrial Switch, 8x10/100/1000M RJ45 + 2xGb SFP slot, Guide Rail,DC9~48V Redundant Supply, -40 ~ 85°C wide-range
Support the 802.1Q VLAN of 4K range;
Support the web page management configuration;
Hardware one-button recovery of factory settings
Dual power inputs with a wide range of 9-48 VDC;
Dial switches enable ringing and port isolation
QoS (IEEE 802.1p and DSCP) improves data transfer certainty;
Port mirroring feature assists in online troubleshooting and allows for data analysis and monitoring
Port aggregation increases bandwidth and enhances the reliability of network connection
Spanning Tree Protocol STP/RSTP ring redundancy
Port loop detection reduces the impact of access loop on the entire network
IES6500-2GF8GT is a guide rail managed industrial Ethernet switch that provides 2 Gigabit fiber ports and 8 Gigabit copper ports via a fan-free and low-power design with industrial rating level 4 and IP40-rated protection. Each product, featuring an operating temperature of -40 - 85°C, superior solidness, design for network communications in harsh applications, high EMI/EMS protection, has been 100% qualified in aging tests.
For example, STP/RSTP, 802.1Q VLAN, QoS function,, port aggregation, port mirroring, loop detection, etc.; support for port configuration, jumbo frame mode, port statistics, speed dial configuration, online upgrade, etc.; support for WEB, SNMP and other access methods. The friendly, simple and convenient interface design of network management system offers a good user experience.
This series contains the following types:
IES6500-2GF4GT: L2 IES 4x10/100/1000M RJ45 with 2x1Gb SFP slot
IES6500-2GF8GT: L2 IES 8x10/100/1000M RJ45 with 2x1Gb SFP slot
Specifications
Item | IES6300-2GF4GT | IES6300-2GF8GT |
Applicable standards | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT IEEE 802.3z 1000BaseFX and 1000BaseT IEEE 802.3x flow control IEEE 802.1d-2004 STP protocol IEEE 802.1w RSTP protocol IEEE 802.1p Qos IEEE 802.1q VLAN SNMPv1/v2c HTTP, DHCP Client | |
Switching feature | Back plane bandwidth: 12 Gbps List of MAC addresses: 2K Chip buffer size: 12 KByte | Qos queue: 8 VLAN-ID: 1-4094 Back plane bandwidth: 20 Gbps List of MAC addresses: 8K Message buffer size: 4.1Mbit |
Port | Fiber port: 1000 Mbps Copper port: 10/100/1000 Mbps self-adaptive, Full/Half duplex mode, MDI/MDI-X supported. LED indicator: P1, P2, RUN, L/A | |
Power source requirement | Input voltage: DC9~48V (redundancy) Full-load power consumption: 5.5W (excluding POE) | Input voltage: DC9~48 V (redundancy) Full-load power consumption: 7W (excluding POE) |
Physical properties
| Enclosure: Aluminum enclosure, IP40-rated protection Size: 116 x 85 x 33 mm Weight: 390 g Mounting method: Guide rail type | Enclosure: Aluminum enclosure, IP40-rated protection Size: 142 × 116 × 48 mm Weight: 720 g Mounting method: Guide rail type |
Environmental restrictions | Working temperature: -40 ~ 85°C (-40 ~ 185°F) Storage temperature: -40 ~ 85°C (-40 ~ 185°F) Relative ambient humidity: 5 ~ 95% (non-condensing) | |
Standards and certification | EMS: IEC61000-4-2(ESD) level 4, IEC 61000-4-4 (EFT) level 4, IEC 61000-4-5(Surge) level 4 Anti-vibration performance: IEC 60068-2-6 Shock resistance: IEC 60068-2-27 Free fall: IEC 60068-2-32 | |
MTBF (mean time between failures) | Time: 500000 h | |
Warranty | Quality assurance: 5 years | |
Product size (mm)
Ordering information
| Item | Specifications |
| IES6500-2GF4GT | 6-Port Gigabit Ethernet L2 managed Industrial Switch, 4x10/100/1000M RJ45 with 2x1Gb SFP,DC 9~48V, dual redundant input , -40~85℃ Wide-Temp |
| IES6500-2GF8GT | 10-Port Gigabit Ethernet L2 managed Industrial Switch, 8x10/100/1000M RJ45 with 2x1Gb SFP,DC 9~48V, dual redundant input , -40~85℃ Wide-Temp |
Parking List
● Ethernet switch
● Installation accessories
● User;s Manual
● Warranty Card & Conformity Certificate
Quality Certifications
CE/FCC/RoHS
