The ES8700-48MGT2Q4X-ACR Managed Ethernet Switch is utilizing industry-leading hardware architecture and equipped with a proprietary operating system, it provides high-performance L2/L3/L4 line-rate switching services. On this basis, it further integrates various network services such as IPv6, MPLS VPN, and network security. Combined with technologies like non-stop upgrade, non-stop forwarding, graceful restart, and redundancy protection, it ensures the network's longest possible uninterrupted communication capability.
It provides 48x 10/100/1000/2500BASE-T RJ45 ports with 2x40G QSFP+and 4x 10GE SFP+ Uplinks. PoE type is available,RJ45 Port 1-48 can support PoE,comply with IEEE802.3af/at,total 700W power budget support.
Product Features
● On a 1U box switch, it achieves an ultra-high port density of 48x2.5G electrical ports, 4x10G SFP+ optical ports, and 2x 40G QSFP optical ports, equipped with a high-performance ASIC switching chip, which can meet the application requirements of various complex scenarios.
● It supports the innovative BVSS (Virtual Switch System) virtualization cluster switching technology, which can virtualize multiple physical devices into one logical device, and its virtual system has unparalleled superiority in performance, reliability, and management compared to independent physical devices.
● Base on the HPS (Hitless Protection System) non-interruptive protection system, it supports STP/RSTP/MSTP protocols, VRRP protocol, and also supports ring network protection, dual uplink master-backup link protection, LACP link aggregation, and other simple and efficient redundancy protection mechanisms. It supports ISSU (In-Service Software Upgrade) for uninterrupted system upgrades, ensuring continuous data forwarding during system upgrades. The ultra-precise BFD bidirectional link detection mechanism, through linkage with layer two and three protocols, achieves millisecond-level fault detection and service recovery, greatly enhancing the reliability of the network system. The comprehensive Ethernet OAM mechanism supports 802.3ah, 802.1ag, and ITU-Y.1731, enabling real-time monitoring of network operation status, rapid fault detection and localization, meeting the 50ms fault recovery time requirement for telecom-level services.
● It supports the IPv6 protocol family, supports IPv6-based Ping, Traceroute, Telnet, SSH, ACL, etc., supports MLD, MLD Snooping, and other IPv6 multicast features, supports IPv6 static routing, RIPng, OSPFv3, BGP4+, and other IPv6 layer three routing protocols, and supports a variety of IPv4 to IPv6 transition technologies.
● Hardware implementation of message priority scheduling and protection, supports prevention of DoS, TCP SYN Flood, UDP Flood, broadcast storms, and large traffic attacks on devices; supports command line level protection, with different levels of users having different management permissions;
● It supports IEEE 802.1x, Radius, Tacacs+, etc., providing users with a comprehensive security authentication mechanism, supports plaintext or MD5 authentication for related routing protocols, supports uRPF (Unicast Reverse Path Forwarding) technology, which can effectively control illegal services; hardware-level deep packet inspection and filtering technology, supports deep inspection of control and data packets, thereby effectively isolating illegal data packets and enhancing the security of the network system.
● Real-time monitoring of the entire machine's operating status, intelligent adjustment, deep energy saving. Intelligent fan design, supports automatic speed adjustment, supports Energy Efficient Ethernet functions, complying with the international standard IEEE 802.3az.
Product Parameters
Basic Specifications |
Switching Capacity | 1280G |
Packet Forwarding Rate | 360M |
MAC Address Capacity | 64K |
Service Ports | 48 x 2.5G RJ45 ports, 4 x 10G SFP+
slots, 2 x 40G QSFP+ Slots |
Dimensions | 44x30x44 (mm) |
Power Supply | AC 100V-240V, 50Hz±10%; DC: 36V~72V Hot-swappable dual power supply redundancy |
Power Consumption: | 125W (POE type:IEEE802.3af/at,700W) |
Environmental Requirements |
Operating Temperature | 0℃-50℃ |
Storage Temperature | -40℃-70℃ |
Operating Humidity | 10%-90% non-condensing |
Storage Humidity | 5%-95% non-condensing |
Software Specifications |
MAC Addressing | Supports static configuration and dynamic learning of MAC addresses Supports viewing and clearing MAC addresses Configurable MAC address aging time Supports MAC address learning quantity limitation Supports MAC address filtering function Supports blackhole MAC entries Supports IEEE 802.1AE MacSec security control |
VLAN | Supports 4K VLAN entries Supports GVRP Supports 1:1 and N:1 VLAN Mapping Supports basic QinQ functionality Supports flexible QinQ functionality Supports Private VLAN |
STP | Supports 802.1D (STP), 802.1W (RSTP), 802.1S (MSTP) Supports BPDU protection, root protection, loop protection |
Multicast | Supports IGMP v1/v2/v3 Supports IGMP Snooping Supports IGMP Fast Leave Supports multicast group policies and multicast group quantity limitations Supports multicast traffic replication across VLANs Supports PIM-SM, PIM-DM |
IPv4 | Supports static routing, RIP v1/v2, OSPF, BGP, IS-IS, BEIGRP Supports policy-based routing Supports equivalent routing for load balancing Supports BFD for OSPF, BGP |
IPv6 | Supports ICMPv6, DHCPv6, ACLv6, IPv6 Telnet Supports IPv6 neighbor discovery Supports Path MTU discovery Supports MLD v1/v2 Supports MLD Snooping Supports IPv6 static routing, RIPng, OSPFv3, BGP4+ Supports manual tunnels, ISATAP tunnels, 6to4 tunnels |
QoS | Supports traffic classification based on L2/L3/L4 protocol header fields Supports CAR traffic limitation Supports 802.1P/DSCP priority re-marking Supports SP, WRR, SP+WRR queue scheduling methods Supports Tail-Drop, WRED congestion avoidance mechanisms Supports traffic policing and traffic shaping Supports Ingress and Egress ACLs, supports matching L2, L3, L4, and IP five-tuple for
replication, forwarding, dropping Supports hash-based same-source same-destination load balancing, ensuring session integrity of
traffic output |
Security Features | Supports L2/L3/L4-based ACL flow identification and filtering security
mechanisms Supports protection against DDoS attacks, TCP SYN Flood attacks, UDP Flood attacks,
etc. Supports suppression functions for multicast, broadcast, and unknown unicast
packets Supports port isolation Supports port security, IP+MAC+port binding Supports DHCP Snooping, DHCP Option 82 Supports IEEE 802.1x authentication Supports Radius, Tacacs+ authentication Supports uRPF Supports command line level protection |
Reliability | Optionally supports 1+1 power supply backup Supports static/LACP link aggregation, supports link aggregation across service
cards Supports EAPS, ERPS ring network protection Supports HSRP, VRRP hot-standby protocols Supports GR for OSPF, BGP Supports BFD for OSPF, BGP Supports ISSU for non-disruptive system upgrades |
Management & Maintenance | Supports Console, Telnet, SSH 2.0 Supports ZTP zero-touch configuration (Zero Touch Provisioning) Supports browser-based WEB management Supports SNMP v1/v2/v3 Supports TFTP file upload and download management Supports RMON event history Supports sFLOW and other traffic statistics and analysis |
Green Energy Saving | Supports IEEE 802.3az Energy Efficient Ethernet |
Order Information
ES8700-48MGT2Q4X-ACR | L2/3 Managed Ethernet Switch,48x10/100/1000/2500Base-X RJ45 with 2x40G QSFP+ and 4x10G SFP+,Dual Power Suppliy,AC 100V-240V, 50Hz±10%; DC: 36V~72V |
ES8700-48MGT2Q4X-PoE-AC | L2/3 Managed Ethernet PoE Switch,48x10/100/1000/2500Base-X RJ45 POE+ with 2x40G QSFP+ and 4x10G SFP+, Power Supply AC:100V-240V,50Hz±10% |
Parking List
● Ethernet Switch
● Installation accessories
● User;s Manual
● Warranty Card & Conformity Certificate
Quality Certifications
CE/FCC/RoHS